LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1992 >> Imperial >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.3L V6 - VIN [R] & 3.8L V6 - VIN [L] >> Removal & Installation >> Cylinder Head >> Removal

Cylinder Head: Removal

  1. Remove intake manifold. See INTAKE MANIFOLD  . Remove exhaust manifold. See EXHAUST MANIFOLDS  . Disconnect necessary wiring and coolant hoses.
  2. Remove rocker arm assembly and push rods. See ROCKER ARMS & PUSH RODS  . Mark push rod location for reassembly reference. Remove push rods. Remove cylinder head bolts in sequence. See Fig 1 . Remove cylinder head.
Fig 1: Cylinder Head Bolt Removal & Installation Sequence
G90H02578Courtesy of CHRYSLER MOTORS.
scientia non olet · About LEMON Manuals