Removal (Fifth Avenue, Imperial & New Yorker)

1. Disconnect negative battery cable. Remove cluster bezel. See CLUSTER BEZEL R & I  . Remove lower steering column cover.
2. Disconnect PRNDL actuation cable from lower steering column by releasing lock bar on plastic insert. See Fig 1 . Squeeze insert legs together and remove insert from column. Move cable out from behind fuse box.
3. Remove rear defogger and radio bezels. Remove upper steering column cover. Remove 4 instrument cluster retaining screws. Pull instrument cluster outward and disconnect rear wiring connectors. Remove instrument cluster.

Fig 1: Removing PRNDL Actuation Cable

Courtesy of CHRYSLER CORP.