LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1989 >> Conquest Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.6L 4-CYL - VIN [E] & 2.6L 4-CYL Turbo - VIN [N]] >> Removal & Installation >> Valves >> Valve Arrangement

Valve Arrangement

NOTE: "Right" and "Left" refer to right and left sides of the engine.

Disassemble cylinder head. Measure valve stem diameter, valve margin and overall length. Replace valves if not within specification. See VALVES & VALVE SPRINGS  table at end of article. Remeasure valve margin after grinding valves. Reverse removal procedure to install valves.

scientia non olet · About LEMON Manuals