Water Pump
Drain cooling system and disconnect battery. Remove fan shroud (if equipped) and lower radiator hose. Remove drive belt, cooling fan, fan clutch, and pulley. Remove water pump. To install, reverse removal procedure using new gasket.
NOTE:
For further information on cooling systems, see ENGINE COOLING article.
COOLANT CAPACITY
| Application | Qts. (L) |
|---|---|
| Conquest | 9.5 (9.0) |
| Raider | 8.5 (8.0) |
| Ram-50 | 8.3 (7.9) |
BELT ADJUSTMENT
| Application | (1) Deflection: In. (mm) | ||
|---|---|---|---|
| Conquest | .28-.39 (7.1-9.9) | ||
| Raider | .28-.34 (7.1-8.6) | ||
| Ram-50 | .35-.47 (8.9-11.9) | ||
|
|||