LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1989 >> Conquest Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Removal & Installation >> Instrument Cluster R & I >> Conquest

Instrument Cluster R & I: Conquest

  1. Remove cluster hood mounting screws. Pull out both edges of the bottom side of hood. While holding in that position, pull upward and out. Disconnect cluster switch connectors on both sides of cluster hood.
  2. Remove screws from bottom of case. Remove nuts from upper part of case. Pull both sides of lower part up and to the rear. Disconnect speedometer cable. Disconnect cluster harness from cluster case. Remove cluster. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals