Pressure Tank Bleeding
- Clean master cylinder cap and surrounding area, then remove cap. With pressure tank at least 1/3 full, connect to master cylinder using adapters. Attach bleeder hose to first bleeder valve to be serviced. See BLEEDING SEQUENCE table. Place other end of hose in clean glass jar partially filled with clean brake fluid so end of hose is submerged in fluid.
- Open release valve on pressure bleeder. Unscrew valve 3/4-1 turn noting fluid flow. When fluid flowing from cylinder to cup is free of bubbles, close bleeder valve securely. Bleed remaining cylinders in correct sequence and in same manner. Remove tool from combination valve.
BLEEDING PRESSURE
| Application | Psi (kg/cm2 ) |
|---|---|
| All Models | 35 (2.46) |