LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1986 >> Laser XT, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Adjustments >> Rear Wheel Bearings - Fwd Models

Rear Wheel Bearings - Fwd Models

  1. Tighten adjusting nut to 240-300 INCH lbs. (27-33 N.m) while rotating wheel. Stop rotation and back off adjusting nut 1/4 turn. Finger tighten adjusting nut while again rotating wheel.
  2. Position nut lock with 1 pair of slots in line with cotter pin hole. Install cotter pin. This adjustment should provide .001-.002" (.025-.076 mm) end play.
scientia non olet · About LEMON Manuals