LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1986 >> Laser Base, 2.2 D, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Steering Column Switches) >> Removal & Installation >> Windshield Washer/Wiper Switch >> Removal

Windshield Washer/Wiper Switch: Removal

WARNING: This page is about a different car, the 1986 Plymouth Horizon and 1986 Dodge Omni. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Disconnect electrical switch from both washer/wiper switch and turn signal switch. Remove lower column cover. With fingers only, carefully lift out horn button.
  2. Remove washer/wiper switch hider disc. Rotate ignition key to "OFF" position and turn steering wheel so that access hole in hub area is at 9 o'clock position.
  3. Using a flat blade screwdriver, loosen turn signal lever screw through this access hole. Disengage dimmer push rod from washer/wiper switch. Unsnap wiring clip and remove switch.
scientia non olet · About LEMON Manuals