LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1986 >> Laser Base, 2.2 D, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Steering Column Switches) >> Removal & Installation >> Lock Cylinder >> Installation

Lock Cylinder: Installation

WARNING: This page is about a different car, the 1986 Plymouth Horizon and 1986 Dodge Omni. However, it is still accessible from the selected car via links, so may be relevant.

Insert cylinder into housing, make sure that it engages lug on ignition switch driver. Install roll pin.

scientia non olet · About LEMON Manuals