LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1986 >> Laser Base, 2.2 D, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Steering Column Switches) >> Removal & Installation >> Ignition Switch >> Removal

Ignition Switch: Removal

WARNING: This page is about a different car, the 1986 Plymouth Horizon and 1986 Dodge Omni. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove connector from ignition switch and place cylinder in "LOCK" position, and remove key.
  2. Remove 2 mounting screws from switch and allow switch and push rod to drop below jacket. Rotate switch 90° to permit removal of switch from push rod.
scientia non olet · About LEMON Manuals