LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1986 >> Laser Base, 2.2 D, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Testing >> Temperature Gauge Alert System >> All RWD Models

All RWD Models

  1. Disconnect wire from temperature gauge sending unit. Connect wire to one lead of Gauge Tester (C-3826A) and remaining tester lead to ground. Turn ignition switch on.
  2. If gauge alert function is okay, LED will illuminate when selector tester is in the "F" position. It will not illuminate when in the "1/2" position. If LED does not work as indicated, replace gauge.
scientia non olet · About LEMON Manuals