LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1986 >> Laser Base, 2.2 D, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Testing >> Electronic Voice Alert >> "Your Fuel Is Low" Circuit

"Your Fuel Is Low" Circuit

  1. Turn ignition on. Disconnect vacuum switch wire located on left inner fender. Disconnect fuel tank sending unit wire. Using a known good fuel tank sending unit, connect it to fuel gauge circuit.
  2. Place float in low fuel position. "Your fuel is low" message should be heard. If no message is heard, test fuel gauge circuit. If circuit is okay, replace voice alert module.
scientia non olet · About LEMON Manuals