LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1986 >> Laser Base, 2.2 D, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Electronic >> Adjustments >> Odometer Adjustment >> Lancer & LeBaron GTS

Lancer & LeBaron GTS

  1. If electronic cluster is replaced, vehicle's actual mileage can be programmed into new cluster in following manner: simultaneously press "TRIP RESET" and "US/MET" buttons. While holding buttons, turn ignition on. Release both buttons. Odometer portion should light up, displaying all zeroes with 1st digit flashing.
  2. Press and release "US/MET" button to change value of first digit (flashing). Start second digit flashing by pressing "TRIP RESET" button. Press and release "US/MET" button to change value of second digit (flashing).
  3. Continue to adjust remaining odometer digits by pressing "TRIP RESET" button to start digit flashing, then pressing "US/MET" button to change value of digit.
  4. Once odometer digits are all adjusted to actual vehicle mileage, simultaneously press "TRIP" and "TRIP RESET" buttons. This will lock in adjusted odometer reading and return cluster to normal operation.
NOTE: When odometer mileage is adjusted, an asterisk appears in the odometer display. Adjustment can be made 3 times if incorrect mileage is entered, as long as less than 10 actual miles have been registered on the cluster.
scientia non olet · About LEMON Manuals