Removal - Diplomat, Gran Fury & New Yorker (RWD)
- Remove bezel screws. Position gearshift in "1" position and pull bezel away from dash. Remove gearshift pointer by loosening set screw on side of column.
- Disconnect speedometer cable and remove cluster screws. Disconnect wiring and remove cluster. Remove odometer knob. Remove 4 plastic pins and pull lens and mask away from cluster housing.
- Remove 2 screws and speedometer. Disconnect odometer switch connector, if equipped. To remove separate gauge cluster, remove 3 screws, disconnect wiring and remove cluster. To remove circuit boards, pry away from cluster assembly and remove voltage limiter.