LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2025 >> Trax ACTIV >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Liftgate Wiring Harness Replacement (- CAC) >> Installation Procedure

Installation Procedure

  1. GM5926154Courtesy of GENERAL MOTORS COMPANY

    Install the liftgate wiring harness (2) through the liftgate grommet opening and the roof panel grommet opening.

  2. Install the liftgate wiring harness grommet (1).
  3. GM5926153Courtesy of GENERAL MOTORS COMPANY

    Install the wiring harness (2) and connect the retainer.

  4. Install the liftgate wiring harness grommet (1) to the roof panel.
  5. GM5926141Courtesy of GENERAL MOTORS COMPANY

    Connect all the connectors of the liftgate wiring harness (2).

  6. Install the liftgate wiring harness grommet (1) to the liftgate.
  7. GM5920395Courtesy of GENERAL MOTORS COMPANY

    {If equipped} Connect the electrical connector.

  8. Liftgate Lower Trim Finish Panel (1) - Remove
  9. GM5920373Courtesy of GENERAL MOTORS COMPANY

    Liftgate Upper Side Trim Finish Panel (1) - Both Sides - Install [2x]

  10. GM5920285Courtesy of GENERAL MOTORS COMPANY

    Liftgate Upper Center Trim Finish Panel (1) - Install

  11. GM5920383Courtesy of GENERAL MOTORS COMPANY

    Install the liftgate trim finish panel pull cup (2).

  12. CAUTION:

    Refer to Fastener Caution .

  13. Liftgate Lower Trim Finish Panel Bolt (1) - Install and tighten - Fastener Specifications
  14. GM6177045Courtesy of GENERAL MOTORS COMPANY

    Headlining Trim Panel (2) - Install

  15. Headlining Trim Panel Retainer (1) - Install [2x]
  16. GM6002299Courtesy of GENERAL MOTORS COMPANY

    Retaining Clip (1) - Install [3x]

  17. GM5927630Courtesy of GENERAL MOTORS COMPANY

    Retaining Clip (1) - Install [5x]

  18. GM5927629Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Install the retainer that attaches the sunshade to the headliner.

  19. Sunshade - Left Side and Right Side (2) - [2x] Install
  20. Sunshade Bolt (1) - Left Side and Right Side - Install and tighten [4x] - Fastener Specifications
  21. GM5927627Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Sunshade Retainer Bolt Cover - Left Side and Right Side (1) - Install [2x]

  22. GM5927625Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Sunshade Support - Left Side and Right Side (2) - Install [2x]

  23. Sunshade Support Bolt - Left Side and Right Side (1) - Install and tighten [2x] - Fastener Specifications
  24. Close the sunshade support bolt access covers.
  25. GM5925432Courtesy of GENERAL MOTORS COMPANY

    Windshield Multifunction Sensor Mount Bracket Cover (1) - Install

  26. GM5925431Courtesy of GENERAL MOTORS COMPANY

    Windshield Multifunction Sensor Mount Bracket Cover Insert (1) - Install

  27. GM6177047Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Reassemble the roof console if it becomes separated upon removal.

    Connect the electrical connectors.

  28. Roof Console (1) - Install
  29. GM5927639Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  30. Rear Seat Position Center Courtesy Lamp (1) - Install
  31. GM5923743Courtesy of GENERAL MOTORS COMPANY

    Roof Rail Rear Assist Handle - Left Side and Right Side (2) - Install [2x]

  32. Roof Rail Rear Assist Handle Bolt - Left Side and Right Side (1) - Install and tighten [4x] - Fastener Specifications
  33. GM5923742Courtesy of GENERAL MOTORS COMPANY

    Roof Rail Assist Handle (2) - Install

  34. Roof Rail Assist Handle Bolt (1) - Install and tighten [2x] - Fastener Specifications
  35. GM5922135Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Body Lock Pillar Upper Trim Panel - Left Side and Right Side (2) - Install [2x]

  36. Quarter Window Trim Finish Panel Bolt - Left Side and Right Side (1) - Install and tighten [2x] - Fastener Specifications
  37. Close the quarter window trim finish panel bolt caps.
  38. GM5922130Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Left side shown, right side similar.

    Center Pillar Upper Trim Panel - Left Side and Right Side (2) - Install [2x]

  39. Center Pillar Upper Garnish Molding Bolt - Left Side and Right Side (1) - Install and tighten [2x] - Fastener Specifications
  40. Close the center pillar upper trim panel bolt caps.
  41. GM5922111Courtesy of GENERAL MOTORS COMPANY

    Center Pillar Lower Trim Panel (1) - Install

  42. GM5921871Courtesy of GENERAL MOTORS COMPANY

    Rear Side Door Sill Garnish Molding (1) - Install

  43. GM5921868Courtesy of GENERAL MOTORS COMPANY

    Front Side Door Sill Garnish Molding (2) - Install

  44. GM5921658Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connectors. [2x]

  45. Windshield Garnish Molding Bolt - Left Side and Right Side (2) - Install and tighten [2x] - Fastener Specifications
  46. Align the retainer clips with the slots in the A pillar and press the windshield garnish molding (1) into place.
  47. Windshield Garnish Molding - Left Side and Right Side (1) - Install [2x]
  48. Reposition the weatherstrip as necessary.
  49. Enable the SIR System. SIR Disabling and Enabling