LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2025 >> Traverse LT, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Seat Hardware, Seat Trim, And Upholstery (2 Of 2) >> Repair Instructions (2 Of 2) >> Rear Seat Cushion Cover and Pad Replacement (Right Side) >> Removal Procedure

Removal Procedure

  1. Rear Seat - Remove - Rear Seat Removal and Installation (Right Side)
  2. GM6385791Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Recliner Handle Retainer (1) - Remove

  3. Rear Seat Recliner Handle (2) - Remove
  4. GM6385793Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Frame Outer Finish Cover Bolt (1) - Remove [2x]

  5. Rear Seat Frame Outer Finish Cover (2) - Remove
  6. GM6385963Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Bolt Cap (1) - Remove

  7. Rear Seat Outer Hinge Finish Cover Bolt (2) - Remove
  8. Rear Seat Outer Hinge Finish Cover (3) - Remove
  9. GM6385978Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Frame Inner Finish Cover Bolt (1) - Remove [2x]

  10. Rear Seat Frame Inner Finish Cover (2) - Remove
  11. GM6386814Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Inner Hinge Finish Cover Bolt (1) - Remove

  12. Rear Seat Inner Hinge Finish Cover (2) - Remove
  13. GM4326191Courtesy of GENERAL MOTORS COMPANY

    Disengage the J-channel retainers from the seat cushion frame.

  14. Remove the rear seat cushion cover and pad assembly.
  15. Remove the rear seat cushion cover (1) from the rear seat cushion pad (3).
  16. If replacing the rear seat cushion pad (3), DISCARD the rear seat cushion heater (2) and rear seat vent fan mat, if equipped.
scientia non olet · About LEMON Manuals