Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia (1) - Remove - Front Bumper Fascia Removal and Installation
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Headlamp Bolt - Left Side and Right Side (1) - Remove [10x]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Release the front headlamp guide pin (1) from the front bumper fascia guide (2).
Front Headlamp - Left Side and Right Side (3) - Remove [2x]
Disconnect the electrical connector. [2x]
Courtesy of GENERAL MOTORS COMPANY

Hood Front Bumper Bracket Support Bolt (1) - Remove [5x]
Hood Front Bumper Bracket (2) - Remove