Removal Procedure
With a flat bladed plastic trim tool, release the retaining clips.
- Instrument Panel Cluster Trim Plate (1) - Remove
Instrument Panel Trim Plate Strap Bolt (1) - Remove [4x]
- Instrument Panel Instrument Cluster Hood (2) - Remove
With a flat bladed plastic trim tool, release the retaining clips.
- Instrument Panel Bolt Cover - Right Side (1) - Remove
With a flat bladed plastic trim tool, release the retaining clips.
- Instrument Panel Bolt Cover - Left Side (1) - Remove
Driver Information Display Bolt (1) - Remove [5x]
Driver Information Display (1) - Remove
- Disconnect the electrical connectors.
Driver Information Display Screw (1) - Remove [4x]
Instrument Panel Cluster Control Module (1) @ Radio Control (2) - Remove