LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Trax LS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Displays And Gauges >> Repair Instructions >> Instrument Cluster Replacement >> Installation Procedure

Installation Procedure

  1. GM6174055Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Upper Trim Panel Cover (2) @ Instrument Cluster (3) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Instrument Panel Upper Trim Panel Cover Bolt (1) - Install and tighten [2x] - Fastener Specifications
  3. GM6174054Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connectors.

  4. Instrument Cluster (1) - Install
  5. Secure the retaining tab.
  6. GM6174053Courtesy of GENERAL MOTORS COMPANY

    Instrument Cluster Bolt (1) - Install and tighten [4x] - Fastener Specifications 

  7. Perform the necessary programming and setup procedure: Control Module References
  8. GM6171232Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Bolt Cover - Right Side (1) - Install

  9. GM6166471Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Bolt Cover - Left Side (1) - Install

  10. GM5910807Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Instrument Cluster Hood (2) - Install

  11. Instrument Panel Trim Plate Strap Bolt (1) - Install and tighten [4x] - Fastener Specifications
  12. GM6166469Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Cluster Trim Plate Applique (1) - Install

  13. GM5910805Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Cluster Trim Plate (1) - Install

scientia non olet · About LEMON Manuals