Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

With the aid of an assistant, install the liftgate. (2)

CAUTION:

Liftgate Hinge Bolt (1) - Install and tighten [4x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Ensure the clip is fully seated when the rod is reinstalled. If the clip cannot be fully seated, a new rod should be installed.

Liftgate Strut-Both Sides (2) - Install
Install the 4 metal clips (1) to each end of the liftgate strut (2).
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connectors (1) and washer hose (2).
Courtesy of GENERAL MOTORS COMPANY

Headlining Trim Panel (2) - Install
Headlining Trim Panel Retainer (1) - Install [2x]
Courtesy of GENERAL MOTORS COMPANY

Roof Rail Rear Assist Handle - Left Side and Right Side (2) - Install [2x]
Roof Rail Rear Assist Handle Bolt - Left Side and Right Side (1) - Install and tighten [4x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Body Lock Pillar Upper Trim Panel - Left Side and Right Side (2) - Install [2x]
Quarter Window Trim Finish Panel Bolt - Left Side and Right Side (1) - Install and tighten [2x] - Fastener Specifications
Close the quarter window trim finish panel bolt cap.