Installation Procedure
Hood Front Bumper Bracket (2) - Install
- Hood Front Bumper Bracket Support Bolt (1) - Install and tighten [5x] - Fastener Specifications
Connect the electrical connector. [2x]
- Front Headlamp - Left Side and Right Side (3) - Install [2x]
- Secure the front headlamp guide pin (1) to the front bumper fascia guide (2).
Headlamp Bolt - Left Side and Right Side (1) - Install and tighten [10x] - Fastener Specifications
Front Bumper Fascia (1) - Install - Front Bumper Fascia Removal and Installation
- After installation, aim the front headlamps. Front Headlamp Aiming (with Horizontal Adjustment) , or Front Headlamp Aiming (without Horizontal Adjustment)
CAUTION: