Removal Procedure
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
- CAUTION:
Do not exert downward force at the forward or rearward edge of the roof console assembly as irreversible damage will occur.
NOTE:The retainers are stronger than the console assembly. During removal, the console may separate, and if this happens, the roof console will need to be reassembled.
Using a flat-bladed plastic trim tool, release the retaining clips.
- Grasp the roof console on both sides and pull down to disengage the clips.
- Disconnect all electrical connectors.
- Roof Console (1) - Remove
Roof Console Backing Plate (1) @ Roof Console (2) - Remove