Removal Procedure
With a flat bladed plastic trim tool, release the retaining clips.
- Instrument Panel Cluster Trim Plate (1) - Remove
Release the plastic retaining tabs.
- Instrument Panel Cluster Trim Plate Applique (1) - Remove
Instrument Panel Trim Plate Strap Bolt (1) - Remove [4x]
- Instrument Panel Instrument Cluster Hood (2) - Remove
Using a suitable plastic trim tool, release the retaining tabs.
- Instrument Panel Bolt Cover - Left Side (1) - Remove
- Instrument Cluster - Remove Instrument Cluster Replacement
Instrument Panel Upper Trim Panel Cover Bolt (1) - Remove [2x]
- Instrument Panel Upper Trim Panel Cover (2) - Remove