Installation Procedure
Instrument Panel Trim Plate Applique - Left Side (2) @ Instrument Panel Steering Column Upper Trim Cover (1) - Install
Instrument Panel Trim Plate Applique - Left Side (2) - Install
- Instrument Panel Trim Plate Applique Bolt (1) - Install and tighten - Fastener Specifications
Secure the instrument panel steering column upper trim cover (1) to the instrument panel steering column lower trim cover in the opposite direction of the arrow.
Connect the electrical connector.
- Instrument Panel Switch Trim Plate (1) - Install
Instrument Panel Switch Trim Plate Bolt (1) - Install and tighten - Fastener Specifications
Instrument Panel Knee Bolster (1) - Install
Instrument Panel Knee Bolster Bolt (1) - Install and tighten [3x] - Fastener Specifications
Hood Primary Latch Release Cable Handle (1) @ Instrument Panel Knee Bolster - Install
Instrument Panel Outer Trim Cover - Left Side (1) - Install
Refer to Fastener Caution .