Installation Procedure
USB 2 Port Receptacle (1) - Install
- Secure the retaining tabs.
Accessory Power Receptacle Retainer (1) - Install
Route the connector through the accessory power receptacle retainer. Align the retainer to the slot in the opening.
- Install the retainer by pressing into place until fully seated.
- Connect the electrical connector to the cigarette lighter receptacle (1).
- Align the tabs on the receptacle (1) to the slots in the retainer. Install the accessory power receptacle by pressing into place until fully seated.
- Install the auxiliary power outlet fuse.
Connect the electrical connectors.
- Instrument Panel Accessory Bezel (1) - Install