Removal Procedure
Front Floor Console (1) - Remove - Front Floor Console Removal and Installation
Open the front floor console armrest.
- Front Floor Console Rear Trim Panel Bolt (1) - Remove
Front Floor Console Wiring Harness Retainer (2) - Remove
- Disconnect the electrical connector.
- NOTE:
To make it easier to separate, turn the console upside down and slide the clips from the bottom of the console
Using a suitable plastic trim tool, release the retaining tabs.
- Front Floor Console Rear Trim Panel (1) - Remove
- {If equipped} Disconnect the electrical connector.
{If equipped} Remove the audio player and USB receptacle bracket:
- Audio Player and USB Receptacle Bracket Bolt (1) - Remove [2x]
- Audio Player and USB Receptacle Bracket (2) - Remove
{If equipped} Front Floor Console Rear Air Outlet (1) - Remove
Release the retaining tabs.
- Low Frequency Console Antenna (1) - Remove