Circuit / System Verification
- Ignition ON.
- Verify DTC B1C4A, B1C4D, B1C9F, B1D71, or B1D74 is not set.
- If DTC B1C4A, B1C4D, B1C9F, B1D71, or B1D74 is set
- Go to next step: If DTC B1C4A, B1C4D, B1C9F, B1D71, or B1D74 is not set
- Program the A11 Radio.
- Verify the DTC is not set.
- If DTC is not set
All OK.
- Go to next step: If DTC is set
- If DTC is not set
- Program the K9 Body Control Module.
- Verify the DTC is not set.
- If DTC is not set
All OK.
- Go to next step: If DTC is set
- If DTC is not set
- Replace the A11 Radio.
- Verify the DTC is not set.
- If DTC is not set
All OK.
- Go to next step: If DTC is set
- If DTC is not set
- Replace the K9 Body Control Module. Refer to Control Module References