LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Tahoe Commercial, 4WD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Case - Mp 3025 (NQH) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Transfer Case Vent Hose Replacement (LM2) >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. {If equipped} Transfer Case Skid Shield (2) - Remove - Transfer Case Skid Shield Replacement
  3. Support the transmission with a suitable jack.
  4. Disconnect all harness retainers attached to the transmission support crossmember.
  5. GM5587684Courtesy of GENERAL MOTORS COMPANY

    Transmission Mount Nut (1) - Remove [2X]

  6. Transmission Support Crossmember Nut (2) - Remove [4x]
  7. Transmission Support Crossmember Bolt (3) - Remove [4x]
  8. GM5587680Courtesy of GENERAL MOTORS COMPANY

    Transmission Support Crossmember (1) - Remove

  9. Lower the transmission and transfer case assembly enough to gain access to the transfer case vent hose.
  10. GM5607884Courtesy of GENERAL MOTORS COMPANY

    Transfer Case Vent Hose (1) - Disconnect

  11. GM6524742Courtesy of GENERAL MOTORS COMPANY

    Release the retainers.

  12. Transfer Case Vent Hose (1) - Remove
scientia non olet · About LEMON Manuals