Removal Procedure
- Raise and support the vehicle. Lifting and Jacking the Vehicle
{If equipped} Transfer Case Skid Shield (2) - Remove - Transfer Case Skid Shield Replacement
- Support the transmission with a suitable jack.
If equipped, remove the wiring harness (2) from the 3 wiring harness retainers (1) and reposition the wiring harness as necessary.
Transmission Mount Nut (1) - Remove [2X]
- Transmission Support Crossmember Nut (2) - Remove [4x]
- Transmission Support Crossmember Bolt (3) - Remove [4x]
Transmission Support Crossmember (1) - Remove
- Lower the transmission and transfer case assembly enough to gain access to the transfer case vent hose.
Transfer Case Vent Hose (1) - Disconnect
Remove the transfer case vent hose retainer (1).
- Transfer Case Vent Hose (2) - Remove