LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Tahoe Commercial, 4WD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Case - Mp 3025 (NQH) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Rear Output Shaft Seal Replacement >> Removal Procedure

Removal Procedure

  1. Place the transmission in neutral service mode. Neutral Service Mode
  2. Raise and support the vehicle. Lifting and Jacking the Vehicle
  3. GM5591283Courtesy of GENERAL MOTORS COMPANY

    Mark the relationship between the propeller shaft and the differential drive pinion gear yoke using a suitable tool.

  4. Rear Propeller Shaft Bolt (1) - Remove [4x]
  5. GM5591284Courtesy of GENERAL MOTORS COMPANY

    Propeller Shaft (1) - Remove

  6. GM5607638Courtesy of GENERAL MOTORS COMPANY

    Transfer Case Rear Output Shaft Seal (1) - Remove and DISCARD