Circuit/System Description
For an overview of the component/system, refer to:Transfer Case Description and Operation
| Circuit | Description |
|---|---|
| Ignition - Terminal 1@M26 Front Drive Axle Actuator | Supplied from a fuse. |
| Control - Terminal 11@K69 Transfer Case Control Module | The output circuit is switched to ground to activate the component. |
| Control - Terminal 2@M26 Front Drive Axle Actuator | The output circuit is switched to ground to activate the component. |
| Signal - Terminal 3@M26 Front Drive Axle Actuator | The output circuit varies between ground and 12 V. |
| Ground - Terminal 4@M26 Front Drive Axle Actuator | Chassis Ground |
| Component | Description |
|---|---|
| K69 Transfer Case Control Module | The control module contains a microprocessor used to process input data to control outputs. |
| M26 Front Drive Axle Actuator | Front Drive Axle Actuator |