Circuit/System Description
For an overview of the component/system, refer to:Transfer Case Description and Operation
| Circuit | Description |
|---|---|
| 5 V Reference - Terminal G@A16 Transfer Case Four Wheel Drive Actuator | Regulated voltage supplied by the control module. |
| Signal - Terminal F@A16 Transfer Case Four Wheel Drive Actuator | The control module input circuit has an internal resistance connected to 5 V. |
| Signal - Terminal E@A16 Transfer Case Four Wheel Drive Actuator | The control module input circuit has an internal resistance connected to ground. |
| Low Reference - Terminal H@A16 Transfer Case Four Wheel Drive Actuator | Grounded through the control module. |
| Component | Description |
|---|---|
| A16 Transfer Case Four Wheel Drive Actuator | The motor is bidirectional. |
| K69 Transfer Case Control Module | The control module contains a microprocessor used to process input data to control outputs. |