Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Install the transmission vent hose clip bracket (2).

CAUTION:

Install and tighten the transmission vent hose clip bracket nut (1). Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Reposition the transmission vent hose (2) then install the transmission vent hose retainer (1).
Courtesy of GENERAL MOTORS COMPANY

Reposition the engine wiring harness (2) then install the engine wiring harness retainer (1).
Raise the transmission into place.
Courtesy of GENERAL MOTORS COMPANY

Transmission Support Crossmember (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Transmission Support Crossmember Bolt (3) - Install [4x]
Transmission Support Crossmember Nut (2) - Install and tighten [4x] - Fastener Specifications
Transmission Mount Nut (1) - Install and tighten - Fastener Specifications
Remove the transmission jack.
Courtesy of GENERAL MOTORS COMPANY

Automatic Level Control Air Supply Reservoir (2) - Install
Install the 3 automatic level control air compressor bolts (1) and tighten. Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Install the chassis wire harness clip (1) to the automatic level control air supply reservoir.
Courtesy of GENERAL MOTORS COMPANY

Install the wiring harness (2) with automatic level control air supply line (3) into the retainers (1).
Lower the vehicle.