Installation Procedure
Automatic Transmission Fluid Pump Seal (3) - Install NEW
- Automatic Transmission Fluid Filter (2) - Install
- Automatic Transmission Fluid Filter Bolt (1) - Install NEW and tighten [2x] - Fastener Specifications
Automatic Transmission Fluid Pan Gasket (3) - Install
- Automatic Transmission Fluid Pan (2) - Install
- Automatic Transmission Fluid Pan Bolt (1) - Install and tighten in sequence [16x] - Fastener Specifications
- Remove the drain pan.
- Fill the transmission to the proper level with NEW transmission fluid. Transmission Fluid Level and Condition Check
- Remove the support and lower the vehicle.
CAUTION:
Refer to Fastener Caution .