Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Automatic Transmission Auxiliary Fluid Pump (1) - Install
Connect the electrical connector.

CAUTION:

Automatic Transmission Auxiliary Fluid Pump Bolt (2) - Install and tighten [3x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Automatic Transmission Auxiliary Fluid Pump Seal (1) - Install NEW
Automatic Transmission Auxiliary Fluid Pump Outlet Pipe Seal (2) - Install NEW
Automatic Transmission Auxiliary Fluid Pump Outlet Pipe (3) - Install
Control Valve Upper Body Bolt (4) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Automatic Transmission Fluid Filter (2) - Install - Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement (L84/L87) , or Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement (LM2)