Conditions for Running the DTC

P2796, P2798, P2799

• Battery Voltage = Greater than 9 V
• Ignition and Start Signal = 9 to 32 V
• Ignition and Start Switch Signal = On

P2797

• DTC P171A, P171B, P171C, U0101, P182E, P1915 = Not set
• DTCs related to the following system/component = Not Set
  • B13 Automatic Transmission Fluid Temperature Sensor
  • B14A Automatic Transmission Output Speed Sensor
  • B14C Automatic Transmission Input Speed Sensor
  • B26 Crankshaft Position Sensor
  • B303 Transmission Range Sensor
• Autostop = Active - For greater than 1.2 s
• Battery Voltage = Greater than 9 V
• Ignition and Start Signal = 9 to 32 V
• Ignition and Start Switch Signal = On
• Propulsion Active = Yes
• Transmission Fluid Temperature = 0 to 110°C (32 to 230°F)
• Transmission Range = D, L, M

Frequency the DTC runs = Continuously - After the running conditions are met