LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Tahoe Commercial, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 10L80 (MHS MHU MQC) - Diagnostic Information And Procedures (2 Of 2) >> Diagnostic Information and Procedures >> DTC P2796-P2799 >> Circuit/System Description

Circuit/System Description

For an overview of the component/system, refer to: Electronic Component Description

Circuit Description
B+ - Terminal 1@G5 Automatic Transmission Auxiliary Fluid Pump Supplied from a fuse.
Control - Terminal 3@G5 Automatic Transmission Auxiliary Fluid Pump The output circuit is switched to 12 V to activate the component.
Control - Terminal 4@G5 Automatic Transmission Auxiliary Fluid Pump The output circuit is switched to ground to activate the component.The output is PWM controlled.
Ground - Terminal 6@G5 Automatic Transmission Auxiliary Fluid Pump Chassis Ground
Component Description
G5 Automatic Transmission Auxiliary Fluid Pump An electric DC motor.
K71 Transmission Control Module The control module contains a microprocessor used to process input data to control outputs.The control module receives information from a variety of sensors, switches and serial data information from other control modules. This information is used to control a combination of solenoid valves to obtain the correct line pressure, gear ratio and torque converter clutch operation.
scientia non olet · About LEMON Manuals