Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
For an overview of the component/system, refer to: Cooling System Description and Operation (LM2)
| Circuit | Description |
|---|---|
| Signal - Terminal 2 | The control module input circuit has an internal resistance connected to 5 V. |
| Signal - Terminal 3 | The control module input circuit has an internal resistance connected to 5 V. |
| Low Reference | Grounded through the control module. |
| Component | Description |
|---|---|
| B96 Cylinder Head Temperature Sensor | The sensor B96 contains 2 sensors in one assembly.The redundant design enables the control module to detect if the B96 signals indicate the same value.The sensor resistance varies with temperature. |
| K20 Engine Control Module | The control module contains a microprocessor used to process input data to control outputs. The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly. |