Circuit/System Testing
WARNING: This page is about a different variant/trim than selected.
- Ignition/Vehicle - Off
- Verify a condition does not exist with the component:
- Linkage@M103 Turbocharger Vane Position Actuator - Binding or Sticking/Debris/Dirt/Interference with other components or objects /Loose/Modified/Visible Damage/Worn
- Variable Geometry Turbocharger Actuator Lever@Turbocharger - Binding or Sticking/Debris/Dirt/Loose/Modified/Visible Damage/Worn
- If a condition exists
Repair or replace as necessary
- Go to next step: If no condition exists
- Test or replace the component: Variable Geometry Turbocharger Actuator Replacement - M103 Turbocharger Vane Position Actuator