Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Fuel Tank Heat Shield (2) - Install
Fuel Tank Shield Retainer (1) - Install [6x]
Courtesy of GENERAL MOTORS COMPANY

Wiring Harness Retainer (3) - Engage [2x]
Courtesy of GENERAL MOTORS COMPANY

Fuel Tank Strap (2) - Install [2x]

CAUTION:

Refer to Fastener Caution .

Fuel Tank Strap Bolt (1) - Install and tighten [2x] - Fastener Specifications
Remove the jack.
Lower the vehicle.