Crankshaft Pulley Bolt Tightening Sequence
WARNING: This page is about a different variant/trim than selected.
| Crankshaft Pulley Bolt Tightening Sequence | |||||
|---|---|---|---|---|---|
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
| Metric (English) | |||||
| 1 | Crankshaft Pulley Bolt [4x] | - | - | 58 N.m (43 lb ft) | Crankshaft Pulley Replacement |