Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P113C, P113D
- {P113C} DTC P2032, P2033 = Not set
- {P113D} DTC P242C, P242D = Not set
- Ignition Off Time For greater than 8 h
- Ignition = On
- Ignition and Start Switch Signal = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met
P2032, P2033, P242C, P242D
- Ignition = On
- Ignition and Start Switch Signal = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met
P2084, P242B
- {P2084} DTC P113C, P2032, P2033, P2085 = Not set
- {P242B} DTC P113D, P242C, P242D, P242E = Not set
- Ignition Off Time For greater than 8 h
- Ignition = On
- Ignition Voltage = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met
P2085, P242E
- {P2085} DTC P2032, P2033 = Not set
- {P242E} DTC P242C, P242D = Not set
- Ignition = On
- Ignition Voltage = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met