X250 Instrument Panel Wiring Harness to Heater Wiring Harness
Connector Part Information
|
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool |
|---|---|---|---|
| I | 84962854 | J-35616-12 (BU) | J-38125-215A |
| II | Not required | J-35616-17 (L-GN) | No Tool Required |
| Pin | Size | Color | Circuit | Terminal Type ID | Option | Function | Pin | Size | Color | Circuit | Terminal Type ID | Option |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | - | - | - | - | - | Not Occupied | 1 | - | - | - | - | - |
| 2 | 0.5 | BK | 1050 | I | - | Ground | 2 | 0.35 | BK | 1050 | II | - |
| 3 - 4 | - | - | - | - | - | Not Occupied | 3 - 4 | - | - | - | - | - |
| 5 | 0.35 | GY | 6137 | I | - | Air Conditioning Evaporator Temperature Sensor Signal | 5 | 0.35 | BN | 6137 | II | - |
| 6 | 0.35 | GN/VT | 2852 | I | - | Body Control Module LIN Bus 6 | 6 | 0.35 | BU | 2852 | II | - |
| 7 | 0.35 | BK/YE | 407 | I | - | Sensor Low Reference | 7 | 0.35 | BK/YE | 407 | II | - |
| 8 | 0.5 0.35 |
VT/WH VT/WH |
239 239 |
I I |
C3A -C3A |
Run/Crank Ignition 1 Voltage Run/Crank Ignition 1 Voltage |
8 | 0.35 | BN/VT | 239 | II | - |
| 9 | 0.35 | WH/YE | 4634 | I | - | HVAC Remote Enable Signal | 9 | 0.35 | RD | 4634 | II | - |
| 10 | - | - | - | - | - | Not Occupied | 10 | - | - | - | - | - |