Removal Procedure
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (9C1/5W4) , or Battery Negative Cable Disconnection and Connection (KL9)
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation (Steel Wheel) , or Tire and Wheel Removal and Installation (Aluminum Wheel)
Rear Brake Bleeder Valve Cap (1) - Remove
- {If equipped} Disconnect the electrical connector. (4)
- {If equipped} Rear Disc Brake Pad Wear Sensor (2) - Remove
- Rear Brake Bleeder Valve (3) - Remove