Removal Procedure
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the tire and wheel assembly. Tire and Wheel Removal and Installation (Steel Wheel) , or Tire and Wheel Removal and Installation (Aluminum Wheel)
Disconnect the electrical connector. (1)
- NOTE:
If sensor is worn from contact with the front brake rotor, then the front disc brake pads must be replaced as well. Front Disc Brake Pads Replacement (J61) , or Front Disc Brake Pads Replacement (J55)
Front Disc Brake Pad Wear Sensor (1) - Remove