LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Tahoe Commercial, 4WD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Repair Instructions >> Front Disc Brake Pad Wear Sensor Replacement >> Installation Procedure

Installation Procedure

  1. GM5517176Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Front disc brake pad wear sensor heads are brittle and should be handled with care when installing.

    Front Disc Brake Pad Wear Sensor (1) - Install

  2. GM5024323Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector. (1)

  3. Install the tire and wheel assembly. Tire and Wheel Removal and Installation (Steel Wheel) , or Tire and Wheel Removal and Installation (Aluminum Wheel)
  4. Remove the support and lower the vehicle.
  5. Using a scan tool, relearn the front disc brake pad wear sensor. Brake Pad Life Monitoring Reset 
scientia non olet · About LEMON Manuals