Removal Procedure
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (9C1/5W4) , or Battery Negative Cable Disconnection and Connection (KL9)
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation (Steel Wheel) , or Tire and Wheel Removal and Installation (Aluminum Wheel)
{If equipped} Front Disc Brake Pad Wear Sensor (1) @Front Brake Caliper - Remove
{If equipped} Front Disc Brake Pad Wear Sensor Retainer (2) - Remove
- {If equipped} Position the front disc brake pad wear sensor wiring harness (1) out of the way.
Front Brake Caliper Guide Pin Clip (1) - Remove [2x]
Front Disc Brake Pad Retaining Spring (1) - Remove
Front Brake Caliper Guide Pin (1) - Remove [2x]
Front Disc Brake Pad (1) - Remove [2x]
Front Brake Hose Fitting (1) - Remove
- Front Brake Hose Washer (2) - Remove and DISCARD [2x]
- Front Brake Hose (3) @Front Brake Caliper - Remove
- Plug the brake hose outlet to prevent brake fluid loss and contamination.
- Plug the front brake caliper inlet to prevent brake fluid loss and contamination.
Front Brake Caliper Bolt (2) - Remove [2x]
- Front Brake Caliper (1) - Remove
- Transfer components as necessary.