Circuit/System Description
For an overview of the component/system, refer to: Liftgate Description and Operation
| Circuit |
Description |
| 5 V Reference |
Regulated voltage supplied by the control module. |
| Low Reference |
Grounded through the control module. |
| Component |
Description |
| M31L Liftgate Power Assist Actuator - Left |
- The motor M125 is a bidirectional DC motor that moves the component: Liftgate
- The assembly also contains a 4-wire hall effect current sensor.
- When the sensor measures increased electrical current, the control module can detect that the component has reached an endstop.
|
| K194 Rear Gate Module |
The control module K194 controls the component: M31L Liftgate Power Assist Actuator - Left |