Circuit/System Verification
- Verify the liftgate will perform the power open function when pressing the S45 Liftgate Control Switch.
- If the liftgate does not power open
Replace the component: A103 Roof Console.
- Go to next step: If the liftgate does power open
- If the liftgate does not power open
- Set the S45B Liftgate Control Switch-Interior to the 3/4 mode.
- Command the power liftgate to open by pressing the S45 Liftgate Control Switch.
Verify the liftgate performs the power open function and stops at the garage mode position.
- If the liftgate performs the full open position
Replace the component: A103 Roof Console
- Go to next step: If the liftgate performs the power open function and stops at the garage mode position.
- If the liftgate performs the full open position
- All OK.