Component Testing
Static Test
- Ignition OFF, disconnect the harness connector at the A23D Front Side Door Latch-Driver.
- With the door unlatched, test for 725 Ω to 740 Ω between the signal terminal 2 and ground terminal 3
- If not within the specified range, replace the A23D Front Side Door Latch-Driver.
- With the door latched, test for 1450 Ω to 1480 Ω between the signal terminal 2 and ground terminal 3
- If not within the specified range, replace the A23D Door Latch Assembly-Driver.